HDMI 4 Pi 7 Display no Touchscreen 1024x600- HDMI/VGA/NTSC/PAL

Make a lovely video setup with a 7 screen at 1024x600 resolution. For this model, we tried to get an inexpensive 1024x600 display that was still high quality and would be good for embedded computing usage. The visible display measures 7 diagonal and is a 39raw TTL39 display. We include a driver board with HDMI, VGAand Composite inputs. The setup is...

€ 85,95
Ontvang bij aankoop
42 SOS spaarpunten
(t.w.v. €4,20)i
Niet in voorraad
Gratis verzenden
Bezorgtijd niet op voorraad
Make a lovely video setup with a 7 screen at 1024x600 resolution. For this model, we tried to get an inexpensive 1024x600 display that was still high quality and would be good for embedded computing usage. The visible display measures 7 diagonal and is a 39raw TTL39 display. We include a driver board with HDMI, VGAand Composite inputs. The setup is very easy to use - simply connect a 5-12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports . Voil, a display! This version comes in 1024x600 instead of the more expensive 1280x800 display. It39s also not IPS so it39s not good for wide-angle visibility. There39s a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tries to auto-detect which input you have and switches to that one or you can 39select39 from the menu which to display. To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM. For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to the native 1024x600 in case it doesn39t detect the resolution properly. You can see our suggested config.txt in the Technical details tab. The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save. For use with a BeagleBone Black running Ubuntu/Debian, we found it works when plugged in, no configuration required. A power adapter is NOT included. You will need to either purchase a 5-12VDC adapter or you can use one you39ve already got around the house. We show the display on a bent wire stand which is not included, but you can pick one up here.
Meer informatie
Geschikt voor n.v.t.
Reviews
Er zijn nog geen reviews voor dit product Schrijf de eerste review over dit product
Je plaatst een review over: HDMI 4 Pi 7 Display no Touchscreen 1024x600- HDMI/VGA/NTSC/PAL as
Uw waardering

Vragen over dit product
Meer van dit merk